Framing your completed designs is an easy way to display all of your hard work. To find out how to frame cross stitch, follow these instructions from Stitch Alphabets & Numbers by Felicity Hall…
It is up to you whether you cover your stitching with glass. I prefer to be able to see the stitches, but glass can help to protect your work. If you choose to use glass it is best to add a mount board as that way the glass will not touch the stitching.
The easiest way to mount work for framing is to use foam board, which is board constructed of foam sandwiched between two layers of acid-free card. If you have used dark thread or fabric for your background, it is best to use dark foam board. If you can’t find any, just add a sheet of dark acid-free card between the stitching and board. To find out how to frame cross stitch professionally, simply follow these instructions:
How to frame cross stitch
1. Cut a piece of foam board to fit inside your chosen frame, cutting it slightly smaller than your blocked stitching to allow room for the fabric and pins.
2. Position your design centrally over the foam board. Fold the corner over, as shown. Using stainless steel flat-headed pins, secure the stitching to the foam board by pushing a pin into the foam part of the board at the centre of each side. Repeat along each edge, gradually working out from the centre pin and gently pulling the fabric tight as you go. Keep checking that your work is still central.
3. Once all the edges have pins along them, mitre the corners neatly and secure using a few stitches. At this stage you could also lace across the back, as shown, to make the work more secure.
4. Place the work in the frame and cover with the backboard. Tape up the back using brown gum tape.
Did this tutorial help you to learn how to frame cross stitch? For instructions on other ways to frame your designs and loads of modern cross stitch charts, get your copy of Stitch Alphabets & Numbers, or download the PDF eBook, today.